2020 Ford F-150 Oil Change in Draper, UT

$129 - $199 is the typical oil change price range at Larry H. Miller Ford Lincoln Draper for a 2020 Ford F-150.

That range reflects using Motorcraft or OEM-equivalent full-synthetic oil and a factory-recommended filter for the 3.5L twin-turbo V6. LHM Ford Draper provides up-front pricing and documents what’s included on your invoice so you can compare with independent shops.

• Includes OEM-spec oil and Motorcraft filter when required
• Price range covers synthetic oil recommended for the 3.5L EcoBoost
• Ask for service specials before you schedule — see service specials

An average dealership oil change for a 2020 Ford F-150 takes about 45 minutes from arrival to completion.

This timeframe includes draining and refilling with OEM-spec oil, replacing the filter, a multi-point inspection and basic fluid/top-off checks. Busy times or extra services (brake inspection, tire service) can extend total time.

• Plan for a 45-minute service window
• Schedule to avoid peak commute hours in Draper
• Use our schedule appointment form for a guaranteed slot

The OEM-recommended oil interval for many 3.5L EcoBoost applications is 7,500 miles under normal driving; shorter intervals apply under severe-duty conditions.

In Draper’s mix of freeway commuting, towing and dusty trail runs, severe-duty conditions (frequent towing, short trips, dusty roads, or heavy idling) push you toward the shorter interval. Keep service records to document compliance with the maintenance schedule.

• Typical OEM interval: 7,500 miles (normal use)
• Severe duty: reduce interval (towing, frequent short trips, dusty conditions)
• Maintain service records for warranty support and resale value

The 2020 Ford F-150 3.5L twin-turbo V6 calls for full synthetic Motorcraft oil meeting Ford specifications (typically 5W-30 in many markets).

Using OEM-spec full synthetic oil helps maintain turbocharger protection and high-temperature stability for the 450-hp EcoBoost engine. Our service advisors verify the correct viscosity and specification for your vehicle and driving habits.

• OEM-recommended: full synthetic that meets Ford WSS specifications
• Viscosity commonly: 5W-30 for the 3.5L EcoBoost (confirm with placard/service guide)
• Dealer uses Motorcraft or equivalent approved oil for warranty compliance

The 2020 Ford F-150 3.5L V6 typically requires about 6.0 quarts of oil with filter change.

Oil capacity can vary slightly by engine code and whether the oil cooler is installed; our technicians top to the exact factory specification and confirm level at operating temperature. We record the final quarts on your invoice for transparency.

• Typical capacity: ~6.0 quarts (with filter)
• Technician confirms level at operating temperature
• Exact fill recorded on service invoice for your records

Dealer service provides OEM-spec oil and filter, a documented multi-point inspection and factory service records that support warranty and resale — features many quick-lube shops do not include.

Quick-lube shops often offer faster turnaround and lower cash prices for conventional oil, but they may not use Motorcraft parts or keep detailed dealer-level service records. For warranty-sensitive owners, towing customers, or trucks with turbocharged engines, dealer service preserves documentation and uses the recommended oil spec.

• Dealer: OEM-spec oil/filter, inspection, documented records
• Quick-lube: faster and sometimes cheaper for conventional oil
• Decide based on warranty needs, towing duty, and engine type

Failure to follow the OEM maintenance schedule and document service can jeopardize warranty coverage for related issues; keeping service records from certified facilities preserves claims eligibility.

Ford’s warranty terms require owners to follow recommended maintenance; if a failure is linked to neglected maintenance, warranty coverage may be denied. Using dealer service ensures documentation and certified technicians are on file.

• Keep stamped service records or invoices for warranty support
• Certified facility records strengthen a warranty claim
• Ask service advisors to print maintenance history for your files

Full synthetic oil provides superior high- and low-temperature protection and is the Ford-recommended choice for the 2020 Ford F-150 3.5L twin-turbo V6.

Synthetic oils resist breakdown under high heat from turbochargers and maintain viscosity during cold Draper winters for faster pumpability. Conventional or blend oils cost less but may require shorter service intervals and offer less protection for turbocharged engines.

• Full synthetic: best thermal stability and turbo protection
• Synthetic blend: intermediate performance and cost
• Conventional: lower cost, typically shorter drain intervals

The 2020 Ford F-150 with the 3.5L twin-turbo V6 (engine code 6VTTG3.5) uses full synthetic oil meeting Ford WSS specifications and typically calls for a viscosity of 5W-30 in most operating conditions. Oil capacity is approximately 6.0 quarts with filter, and Motorcraft or Ford-approved oils are specified to protect turbochargers and meet warranty requirements. The 450-hp, 510 lb-ft engine benefits from oil with high thermal stability for towing and high-load driving.

Severe-duty service — frequent towing, dusty trail runs around Corner Canyon, lots of short trips, or heavy idling — shortens recommended intervals versus normal use. Bring your 2020 Ford F-150 to Larry H. Miller Ford Lincoln Draper in Draper for an OEM-spec oil change — schedule service.

We serve Draper neighborhoods from South Mountain and Suncrest on the hills to the Draper Historic District, Belleview and Steeplechase subdivisions on the valley floor. Draper drivers frequently commute to Salt Lake City or the Silicon Slopes, and many use their trucks for towing — both factors that influence oil selection and service intervals. Our technicians account for local climate: cold winter starts, dusty canyon access, and towing loads when recommending intervals.

Larry H. Miller Ford Lincoln Draper has been serving the Salt Lake Valley area and Draper drivers with factory service processes and trained technicians. For directions, service hours, or to schedule appointment, contact our service team online or by phone. We can also review current service specials that may apply to your visit.

Our 2020 Ford F-150 oil change routine follows a step-by-step process: drain old oil, replace the Motorcraft or Ford-approved filter, refill with OEM-spec full synthetic oil to the exact factory capacity, perform a multi-point vehicle inspection, top off essential fluids and check tire pressures. Technicians confirm oil level at operating temperature and reset maintenance reminders when applicable.

We document the service on your invoice to support warranty and resale records. For transparent scheduling, schedule appointment or call our service desk; if you want potential savings, check service specials before you arrive. Our phone number is (801) 553-1700 for click-to-call directions and assistance.