2017 Ford Explorer Air Filter in Draper, UT

The engine air filter on a 2017 Ford Explorer is housed in a readily accessible airbox in the engine bay on the passenger side.

On this SUV the airbox is a plastic housing secured with clips or screws; you can see it immediately after opening the hood. The cabin filter on the 2017 Ford Explorer is typically behind the glove box or under the dash. Local driving conditions around Draper—dusty frontage roads or seasonal pollen—make visual checks useful during routine service.

• Engine air filter: plastic airbox in the engine bay (passenger side).
• Cabin filter: behind glove box or under dash access panel.
• Technicians inspect seals and housing when changing filters.

The engine air filter protects the engine intake for combustion; the cabin air filter protects the vehicle interior and HVAC airflow for passengers.

The engine filter traps dirt, sand, and road grit before air reaches the throttle body and MAF sensor, which affects horsepower and fuel economy. The cabin filter captures pollen, dust, and exhaust particulates to maintain comfortable, healthy cabin air for families riding to Draper Park or weekend trips to Cowabunga Bay.

• Engine filter: combustion air; influences power and efficiency.
• Cabin filter: HVAC air; affects odor and airflow quality inside the vehicle.
• Both are inspected during a standard filter service.

Common signs include reduced engine power, lower fuel economy, rough idle for the engine filter, and weak HVAC airflow or a musty odor for the cabin filter.

If you notice sluggish acceleration on uphill commutes toward the hills around Suncrest or increased fuel use on Bangerter Highway, the engine filter may be restricted. Inside the vehicle, diminished A/C or heating output and persistent odors indicate the cabin filter needs attention—especially after dusty summers or high-pollen months in Draper.

• Engine symptoms: reduced power, throttle hesitation, decreased MPG.
• Cabin symptoms: poor airflow, odors, increased dust inside the cabin.
• Technicians confirm source with visual inspection and intake checks.

Many owners can replace the engine air filter themselves; cabin filter replacement is often more involved and may require glove-box trim removal or panels.

For the engine filter you typically unclip the airbox and swap the element—this is DIY-friendly if you have basic tools. The cabin filter location behind the glove box can require dropping or removing trim; dealer service adds an intake/MAF visual inspection and ensures the correct OEM-spec parts and seals are installed, which protects HVAC performance.

• DIY: engine filter swap is usually straightforward with simple tools.
• Dealer benefit: OEM-spec parts, intake and MAF visual check, proper disposal.
• Cabin filter: consider dealer help if you’re not comfortable with dash trim removal.

Larry H. Miller Ford Lincoln Draper installs OEM-spec filters and follows manufacturer fitment and sealing recommendations for Ford vehicles.

Using OEM-spec elements preserves designed airflow, filtration efficiency, and sensor protection on the 2017 Ford Explorer. Our service technicians verify part numbers and fit, and they inspect intake seals and the MAF sensor area so the replacement meets factory expectations—important for vehicles driven to local landmarks like Draper Park or the aquarium.

• OEM-spec filters matched to Ford part numbers when available.
• Intake housing and seal checks included in the replacement process.
• Visual MAF sensor check to reduce post-install drivability issues.

At Larry H. Miller Ford Lincoln Draper, the engine filter is accessed from the engine bay airbox and the cabin filter from behind the glove box or dash access panel.

Our technicians follow factory access steps so service is fast and documented. When you bring a 2017 Ford Explorer to our Draper service drive, we remove protective covers, inspect the housings, and verify proper resealing to avoid water or dust intrusion—particularly important after winter road treatments or dusty summer drives.

• Engine airbox opened in the engine bay for element removal.
• Cabin filter accessed via glove box or lower dash panel.
• Housing seals and drainage checks completed during service.

Having filters replaced at Larry H. Miller Ford Lincoln Draper ensures OEM-spec parts, a visual intake/MAF inspection, and documented service history for your 2017 Ford Explorer.

Dealer service preserves factory fit and keeps maintenance records that can help with resale or warranty concerns. For Draper drivers who commute to Salt Lake City or recreate on Corner Canyon trails, dealer inspection adds value by confirming seals, housings, and related sensors are in proper condition.

• OEM-spec filter installation and housing inspection included.
• Service records maintained on file for future reference.
• Scheduling available online; see the service scheduler to book an appointment.

The 2017 Ford Explorer sees a wide blend of urban commuting and trail or family use in Draper, and that mixed driving loads both engine and cabin filters more quickly than steady highway miles. We serve neighborhoods from Suncrest and South Mountain down to the Draper Historic District, Belleview, and Steeplechase, and tailor inspections to local conditions like seasonal pollen and dusty frontage roads. Our process adjusts for the 2017 Ford Explorer’s turbocharged 2.3L inline engine: technicians visually inspect intake seals and the MAF sensor area while swapping elements.

Schedule service online using the service scheduler for a convenient appointment and to note any symptoms you’ve observed during commutes on I‑15 or Bangerter Highway.

An air filter replacement for the 2017 Ford Explorer includes step-by-step checks and installations designed to preserve performance and cabin comfort. Technicians perform an engine air filter inspection and replacement, examine the cabin filter and replace if needed, check the intake housing and seals for cracks or improper seating, and do a visual inspection of the MAF sensor and surrounding wiring. Work is documented so you have a clear service record tied to this SUV.

Warranty terms for parts apply as stated in our service desk records; if you need pricing details or current service offers, view our service specials or schedule service.

For the 2017 Ford Explorer the vehicle uses a turbocharged 2.3L inline engine (engine code 4ITCG2.3) with a designed intake path and a separate HVAC cabin intake. The engine filter protects the turbocharged intake and sensors; the cabin filter treats air before it reaches the HVAC system. Common service callouts for this model include inspection of intake seals and the MAF sensor area—issues that can affect the Explorer’s 280 hp delivery and throttle response if left unchecked.

Bring your 2017 Ford Explorer to Larry H. Miller Ford Lincoln Draper in Draper for OEM-spec filter service — schedule service.