2016 Ford Fusion Battery & Engine Light FAQs

What does it mean when the check engine light comes on in a 2016 Ford Fusion?

• It indicates the vehicle's onboard diagnostics detected an issue — anything from a loose gas cap to an emissions or engine system fault.
• At Larry H. Miller Ford Lincoln Draper our factory-trained technicians use OEM-grade scanners to identify the exact code and recommend the right repair for long-term reliability.
• Addressing codes quickly preserves fuel economy, prevents secondary damage, and can save you money over time. We often cost less than independent shops while delivering certified repairs and transparent pricing.
• Warranty repairs must be completed at a certified dealership to remain valid; ask our advisors about warranty coverage and service financing options to get needed work done now and pay later.
• To get a fast, accurate diagnosis, schedule service online or check our current service specials.

How long does a check engine light service take?

• Most diagnostics are completed within 30–90 minutes depending on the issue and any required test drives; some repairs may require longer or parts ordering.
• Larry H. Miller Ford Lincoln Draper prioritizes quick turnaround with clear timelines, courtesy amenities, and efficient lanes so your 2016 Ford Fusion gets back on the road sooner.
• We provide an estimate before work begins and discuss long-term savings from OEM parts and certified labor that protect vehicle value.
• Ask about service financing to handle immediate repairs without delay, and view our service specials before you arrive.
• Ready to book? Please schedule appointment and we will prepare a fast, professional inspection.

How much does a check engine light diagnostic cost for a 2016 Ford Fusion?

• Diagnostics typically start around $69 for a basic code read; pricing varies by complexity and necessary testing. Choosing our dealership delivers value through accuracy, warranty protection, and genuine parts.
• After diagnosis we provide a clear estimate and explain immediate and long-term savings of fixing issues now — fewer breakdowns, better MPG, and prolonged engine life.
• We often cost less than independent shops while offering factory-trained technicians and dealer-grade equipment. Warranty repairs must be completed at a certified dealership to remain covered.
• Ask about service financing to spread payments and view current discounts via our service specials.
• To get started, schedule service and our team in Draper, UT will prepare your 2016 Ford Fusion for a fast, accurate check.

What is the most common reason for check engine light on a 2016 Ford Fusion?

• The most frequent causes include a loose or faulty gas cap, oxygen sensor issues, or problems with ignition coils and spark plugs — all affect emissions and performance.
• Larry H. Miller Ford Lincoln Draper diagnoses root causes with OEM scanners, avoiding unnecessary parts replacement and protecting resale value.
• Fixing problems early preserves fuel economy and reduces the chance of catalytic converter damage, which is costlier to repair later.
• We provide transparent estimates, OEM parts, and warranty-backed labor; warranty repairs must be done at a certified dealership to remain valid.
• Use our online tools to review service specials and schedule service today.

What is the first thing to check when the check engine light comes on?

• Check the gas cap for secure fit — a loose cap is a common, simple cause that can clear the code after tightening.
• If the light remains, bring your 2016 Ford Fusion to Larry H. Miller Ford Lincoln Draper for a proper scan; our certified technicians will read codes and explain next steps clearly.
• We emphasize quick, reliable service with OEM parts, transparent pricing, and service financing so you can get repairs now and pay later.
• Schedule via our online schedule service page and check current service specials before your visit.

2016 Ford Fusion Check Engine Light Reset

Resetting a check engine light on a 2016 Ford Fusion may sound simple, but it should be done only after the underlying issue is diagnosed and repaired. Clearing codes without addressing the cause can mask problems that lead to reduced fuel economy, increased emissions, or more serious engine damage. At Larry H. Miller Ford Lincoln Draper in Draper, UT, our technicians first perform a full diagnostic scan to identify the specific trouble codes and any pending issues. We use OEM-level tools and up-to-date technical data to interpret codes correctly and to determine whether a software update, sensor replacement, or mechanical repair is required. After completing recommended repairs using genuine Ford parts, we confirm the repair by road-testing the vehicle and re-scanning the system. This process ensures the check engine light stays off and the vehicle operates as intended, protecting your long-term ownership costs and reliability. We offer transparent estimates, warranty-backed repairs (warranty work must be performed at a certified dealership), and service financing so you can get the work done now and pay over time. To schedule work, please schedule appointment and review our current service specials for savings.

2016 Ford Fusion Check Engine Light Codes

Common check engine light codes for the 2016 Ford Fusion often relate to the oxygen sensor (P013x), catalytic converter efficiency (P0420), misfire detection (P030x), or EVAP system leaks (P044x). Each code points to a different severity and cost implication: an oxygen sensor replacement is generally moderate in price but ignoring it raises fuel consumption and emissions; a P0420 left unaddressed may lead to catalytic converter failure, which is significantly more expensive to replace; misfires left unresolved can damage pistons or catalytic components; and EVAP leaks may be simple to fix — such as a faulty purge valve or gas cap — but can result in failed emissions inspections when neglected. At Larry H. Miller Ford Lincoln Draper we provide clear diagnostics and prioritized repair plans so you understand both immediate costs and long-term savings. Our certified technicians use genuine Ford parts for durability and warranty protection — remember, warranty repairs must be performed at a certified dealership. We strive to offer competitive pricing that often costs less than independent shops while delivering factory-quality service. Explore our service specials and schedule service to get a fast, accurate inspection in Draper, UT.

Check Engine Light Flashing

A flashing check engine light on your 2016 Ford Fusion signals a severe condition — usually a misfire that can allow raw fuel into the exhaust stream and overheat the catalytic converter. This is a safety and mechanical priority: driving with a flashing light risks further engine damage and costly repairs. At Larry H. Miller Ford Lincoln Draper we treat flashing lights as urgent. Our technicians perform priority diagnostics to identify misfires, ignition or fuel system failures, and any related sensor faults. We provide a clear repair plan, estimate, and timeline so you can make informed decisions. Take advantage of our certified technicians, OEM parts, and dealer service financing to address the issue immediately and avoid bigger future costs. We also post current promotions and loyalty savings via our service specials. If your check engine light is flashing, please do not delay — schedule service now or contact our service team at Larry H. Miller Ford Lincoln Draper in Draper, UT for fast support and reliable repairs.